LAUDA PRO RP 290 EC
Cooling heating circulator 230 V; 50 Hz
Thermostatic circulator with latest microprocessor technology. Integrated cooling system
Large 5,7″ Multi-Touch-Color display
Programmer with up to 100 programs, up to 50 segments each
User administration for up to 20 user
Data in- and export via USB
Timer und count-down-function
Operation with multi touch display
EasyUse system for simple operation of the whole unit
SelfCheck Assistent for system diagnosis
Detachable remote control panel
Tower design with small footprint
Low filling volume enables rapid changes in temperature
Bath vessel made of stainless steel (insulated, with overflow and drain tap)
LAUDA Varioflex pump (pressure/suction) with 8 selectable levels, connections rear
USB and Ethernet interface equipped as standard
Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules)
SmartCool system for energy-saving digital cooling management including compressor on-off control
Hybrid cooling system: (heat removal complementary with cooling water)
Utilizes natural refrigerants
Fully electronic continuous controller with PID action for internal and external control
PowerAdapt system for the use of the maximum possible amount of heat as long as permitted by the power supply system
Low-level protection and adjustable over-temperature protection with acoustic alarm. Float switch for identifying of low or high level
Power cord with angled plug (CEE7/7)
Technical data (according to DIN 12876)
Working temperature range -90 °C … 200 °C
Ambient temperature range 5 °C … 40 °C
Temperature control ± 0,05 °C
Heater power 2,5 kW
Cooling capacity at 20 °C 0,80 kW
Power consumption max. 3,7 kW
Rated current 16,0 A
Circuit breaker N/A
Pressure-/Suction pump
– Pump pressure/suction max. 0,7 / 0,4 bar
– Pump flow max. pressure/suction 20 / 22 L/min
Pump connections M16x1
Filling volume min./max. 2,4 / 4,4 L
Overall dimensions (W x D x H) 390 x 600 x 685 mm
Standard accessories 2 closing plugs and
2 nipples 13 mm for pump connectors
2 nipples10 mm with screw cap G3/8
for cooling water