LAUDA PRO RP 2090 C
Cooling heating bath thermostat 230 V; 50 Hz
Thermostatic bath with latest microprocessor technology. Integrated cooling system
Large 5,7″ Multi-Touch-Color display
Programmer with up to 100 programs, up to 50 segments each
User administration for up to 20 user
Data in- and export via USB
Timer und count-down-function
Operation with multi touch display
EasyUse system for simple operation of the whole unit
SelfCheck Assistent for system diagnosis
360° turnable and detachable control panel for remote control
Low height of appliance when control panel removed
Significantly enlarged accessible volume
Bath vessel made of stainless steel (insulated, with handles and drain tap)
Internal LAUDA Varioflex pump with 8 selectable levels
USB and Ethernet interface equipped as standard
Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules)
SmartCool system for energy-saving digital cooling management including compressor on-off control
Hybrid cooling system: (heat removal complementary with cooling water)
Utilizes natural refrigerants
Fully electronic continuous controller with PID action for internal and external control
PowerAdapt system for the use of the maximum possible amount of heat as long as permitted by the power supply system
Low-level protection and adjustable over-temperature protection with acoustic alarm. Float switch for identifying of low or high level
Power cord with angled plug (CEE7/7)
Technical data (according to DIN 12876)
Working temperature range -90 °C … 200 °C
Ambient temperature range 5 °C … 40 °C
Temperature control ± 0,01 °C
Heater power 3,6 kW
Cooling capacity at 20 °C 0,80 kW
Power consumption max. 3,7 kW
Rated current 16,0 A
Circuit breaker N/A
Bath volume min./max. 12,5 / 21,0 L
Size of bath (W x D x H) 300 x 290 x 200 mm
Overall dimensions (W x D x H) 500 x 600 x 780 mm
*without console, otherwise 130 mm higher
Standard accessories 1 Bath cover
2 nipples10 mm with screw cap G3/8
for cooling water