LAUDA PRO P 2 E
Heating circulator 200-230 V; 50/60 Hz
Thermostatic circulator with latest microprocessor technology. Installed cooling coil
High-contrast graphical OLED-Display
Integrated programmer, 1 program with max. 20 segments
Operation with Cursor- and Softkeys
EasyUse system for simple operation of the whole unit
SelfCheck Assistent for system diagnosis
Detachable remote control panel
Tower design with small footprint
Low filling volume enables rapid changes in temperature
Bath vessel made of stainless steel (insulated, with overflow and drain tap)
LAUDA Varioflex pump (pressure/suction) with 8 selectable levels, connections rear
USB and Ethernet interface equipped as standard
Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules)
Fully electronic continuous controller with PID action for internal and external control
PowerAdapt system for the use of the maximum possible amount of heat as long as permitted by the power supply system
Low-level protection and adjustable over-temperature protection with acoustic alarm. Float switch for identifying of low or high level
Power cord with angled plug (CEE7/7)
Technical data (according to DIN 12876)
Working temperature range 80 °C … 250 °C
– with external cooling -30 °C … 250 °C
Ambient temperature range 5 °C … 40 °C
Temperature control ± 0,05 °C
Heater power 2,5 kW
Power consumption max. 2,7 kW
Rated current 12,0 A
Circuit breaker N/A
Pressure-/Suction pump
– Pump pressure/suction max. 0,7 / 0,4 bar
– Pump flow max. pressure/suction 20 / 22 L/min
Pump connections M16x1
Filling volume min./max. 2,4 / 4,4 L
Overall dimensions (W x D x H) 250 x 365 x 425 mm
Standard accessories 2 closing plugs and
2 nipples 13 mm for pump connectors
2 nipples10 mm with screw cap G3/8
for cooling water